1. Forums
  2. Discord
  3. About Mapcore
  4. Patreon Supporters
  • Login
  • Register
  • Search
This Thread
  • Everywhere
  • This Thread
  • This Forum
  • Articles
  • Pages
  • Forum
  • More Options
  1. Mapcore
  2. Discussions
  3. Off-Topic

[PLOBLEM] 9800pro @ xt not showing some resolutions?

  • ⌐■_■
  • February 5, 2006 at 11:39 PM
  • ⌐■_■
    • February 5, 2006 at 11:39 PM
    • #1

    Hi guys,

    Here is my issue:

    I have bought a 9800pro, flashed to xt stock speeds. The card has a r360 core and is being cooled by a powerfull artic silencer. I have never had any problems concerning artifacts or other fooked up things on my monitor.

    The thing is: my monitor goes into standby mode when I put it on the following resolutions: 1280 x 1024, and: 1360 x 1024. Of course I allready tried a few things, respectively:

    - flashed from xt to pro and vice versa

    - locked refreshrates at lowest

    - adjusted voltages

    - tried another monitor

    - tried several drivers, including older drivers and omega drivers

    - updated to latest mobo bios

    - reinstalled drivers, after removing all drivers (nvida, ati and onboard s3)

    - installed windows servicepack 2

    It's not that it's impossible because I have gotten this card to display the mentioned resolutions but that was when I just flashed the card. Windows was 'recognizing' the newly flashed card as 'new' and did not make use of the allready installed ati drivers. When I restarted my pc, I again, was unable to load the mentioned resolutions.

    I am out of solutions (no pun intended, lam0r). Can anybody help me? Advice is greatly appreciated!

  • ⌐■_■
    • February 6, 2006 at 12:27 AM
    • #2

    Nope, both models (Iilyama VM 1451 and Dell p09, both 19 -and 17 inch) are tested on both resolutions.

  • ginsengavenger
    • February 6, 2006 at 2:21 AM
    • #3

    (whups I hit the wrong button... that missing post was asking if it was possible the monitors didn't support those resolutions)

  • ⌐■_■
    • February 6, 2006 at 11:51 AM
    • #4

    No problem

  • mawibse
    • February 6, 2006 at 1:06 PM
    • #5

    Try these drivers: http://www.omegadrivers.net/

  • ⌐■_■
    • February 6, 2006 at 1:29 PM
    • #6

    Did that. It didn't work.

  • rockdude86
    • February 6, 2006 at 3:35 PM
    • #7

    dont know shit about this kinda stuff... but seems to me windows is a bit confused maybe try the card in a different comp??

  • Spellbinder
    • February 6, 2006 at 3:58 PM
    • #8

    Do you have the proper drive to the monitor?

    Spellbinder.

  • ⌐■_■
    • February 7, 2006 at 11:11 AM
    • #9

    My monitor does not need drivers to run on XP plus I haven't found any for my vision master 1451...

  • Spellbinder
    • February 7, 2006 at 12:20 PM
    • #10

    Well i can only speak for me and I have had problems with refreshrate and resolution before even though i had right drivers for the card, but when i used the right ones for my monitor i solved it.

    I don't think generic monitors can handle everything.

    I know for a fact that it doesn't handle all refreshrates because i just recently (2 days ago) tried to change it on my monitor and i don't have the right drives.

    Anyways here you have the drives for your monitor, only drawback is that you have to register, but thats cheep for a driver you need.

    Its at Driverguide and if you google it you probably could find it elsewhere and maybe even without have to register.

    http://%7boption%7d

    At least its worth a try, and if nothing else it always feels better when you know you have the right stuff for your things.

    Spellbinder.

  • skdr
    • February 7, 2006 at 1:04 PM
    • #11

    Disable the refresh locks on every resolution and try again.

  • ⌐■_■
    • February 7, 2006 at 2:37 PM
    • #12

    Thank you very much, spellbinder!

    How do I disable the refreshlocks on every resolution, skdr?

  • skdr
    • February 7, 2006 at 2:42 PM
    • #13

    How did you enable refresh lock in first place?

  • Spellbinder
    • February 7, 2006 at 2:44 PM
    • #14

    Untick that little box that says "only show refresh that the monitor can handle"

    I'll do a screenie for you hold on.

    [Edit]

    Dammit i forgot i had swedish os, but i think you know how to get to the refresh any way.

    [Blocked Image: http://home.c2i.net/berixon/jpg/refresh.jpg]

    Use the right drive!!!

    [/edit]

    Spellbinder.

  • ⌐■_■
    • February 7, 2006 at 2:49 PM
    • #15

    Wow! I'm totally stunned by your fast replies!

    And Spellbinder, I used that method. It's just that I wanted to be sure to have used the same method.

    Thanks!

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login
Discord

The Mapcore Discord is our lively IRC channel of the 2000s reborn. Chat about level design, gaming, and more.

Latest Posts

  1. [cs2][WIP] De_digital Version 2! Looking for Feedback

    Howw3
    November 19, 2026 at 5:56 PM
  2. Let's go!

    Thrik
    November 18, 2026 at 6:48 PM
  3. [TF2] koth_arctic - revisiting my old winter map

    zlatan24
    November 18, 2026 at 1:06 PM
  4. Hello from Normandy: Metin, working on a tactical FPS

    zlatan24
    November 17, 2026 at 6:29 PM
  5. Mapcore Introductions Thread

    bergman
    November 16, 2026 at 12:21 PM
  6. BELEK: turning Rouen into competitive FPS maps (Godot project, feedback wanted)

    zlatan24
    November 12, 2026 at 6:23 PM
  7. CS2 sticker critique | Would the eye or blade read first on an AK?

    EmberKrakenCS2
    November 9, 2026 at 10:21 PM
  8. dod_poznan

    Smile_2000
    November 9, 2026 at 9:10 AM
  9. [cs2][WIP] De_digital (A side only) Looking for Feedback

    Howw3
    November 5, 2026 at 9:22 PM
  10. How do I setup CS1.6 mapping on linux?

    zlatan24
    November 2, 2026 at 6:43 AM

Users Viewing This Thread

  • 1 Guest
  1. Privacy Policy
  2. Contact
Powered by WoltLab Suite™