1. Forums
  2. Discord
  3. About Mapcore
  4. Patreon Supporters
  • Login
  • Register
  • Search
This Thread
  • Everywhere
  • This Thread
  • This Forum
  • Articles
  • Pages
  • Forum
  • More Options
  1. Mapcore
  2. Discussions
  3. Off-Topic

HELP: router-router LAN-LAN

  • ESToomere
  • March 12, 2015 at 7:28 AM
  • ESToomere
    • March 12, 2015 at 7:28 AM
    • #1

    My problem:
    I used to be able to host games on my old router, got fibre internet which meant upgrading to a new router. The new router has fucky ports/UPnP which reserves all UDP ports, Telnetting and blasting the suckers didn't work.

    My idea:
    What if I bridge the old router to the new router? I think I can only do LAN-LAN though, so essentially, a dedicated gaming router (but with the same SSID and WAP so there won't really be a difference AFAIU).

    My question:
    Will this work? The old router is already port forwarded, will the Strict NAT still apply since it goes through the first router? Is this just my lunatic typing at 1 AM or an actual solution?

  • Vaya
    • March 12, 2015 at 8:41 AM
    • #2

    Yes that could work. You might need two external IP addresses though depending on how good the fibre router is.


    We use a similar method at work for our branches.


    Cisco ASA 5505 holding a VPN back here


    Dumb piece of shit router - http://www.ebay.co.uk/itm/like/22169…ff14=108&ff19=0- holding the ADSL connection


    We turn off NAT etc on the billion and just have it hold the connection. the heavy lifting is all the cisco.


    Edit- Basically it might work on your set but can't say for sure without seeing your set up.

  • ESToomere
    • March 12, 2015 at 3:19 PM
    • #3

    My main issue is that Router 2 has no WAN port, so I HAVE to make it a LAN-LAN slave via Router 1. This seems kinda cavemany if Router 1 blocks everything that attempts to enter Router 2. Or should DDNS take care of that?

  • Vaya
    • March 12, 2015 at 3:35 PM
    • #4

    My boss is saying buy a new fibre router...I asked him (he's got like 10 year network experience at high level) and he's saying anything blocked by the first router will not be passed any further down the line so either you find a way of turning off the UDP reservation or totally bypassing it or you'll just need a decent fibre router.

  • ESToomere
    • March 12, 2015 at 3:51 PM
    • #5

    Thanks, that's what I suspected.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login
Discord

The Mapcore Discord is our lively IRC channel of the 2000s reborn. Chat about level design, gaming, and more.

Latest Posts

  1. BELEK: turning Rouen into competitive FPS maps (Godot project, feedback wanted)

    zlatan24
    November 12, 2026 at 6:23 PM
  2. CS2 sticker critique | Would the eye or blade read first on an AK?

    EmberKrakenCS2
    November 9, 2026 at 10:21 PM
  3. dod_poznan

    Smile_2000
    November 9, 2026 at 9:10 AM
  4. [cs2][WIP] De_digital (A side only) Looking for Feedback

    Howw3
    November 5, 2026 at 9:22 PM
  5. Hello from Normandy: Metin, working on a tactical FPS

    Thrik
    November 2, 2026 at 10:19 PM
  6. How do I setup CS1.6 mapping on linux?

    zlatan24
    November 2, 2026 at 6:43 AM
  7. CS:S | de_honor | Map creation process by D'artagnan

    Dartagnan
    November 1, 2026 at 5:41 PM
  8. Made a map maker for my indie game.

    daud2k7
    November 1, 2026 at 4:19 PM
  9. First CS2 Maps DM and Bomb Defusal

    zlatan24
    November 1, 2026 at 3:06 PM
  10. POLYSTRIKE - Finally Announced After Years of Development!

    MetinSaygin
    October 31, 2026 at 10:57 AM
  1. Privacy Policy
  2. Contact
Powered by WoltLab Suite™