1. Forums
  2. Discord
  3. About Mapcore
  4. Patreon Supporters
  • Login
  • Register
  • Search
This Thread
  • Everywhere
  • This Thread
  • This Forum
  • Articles
  • Pages
  • Forum
  • More Options
  1. Mapcore
  2. Discussions
  3. Level Design

So how does one continue..? [CS:GO]

  • Spherix
  • January 31, 2013 at 3:54 PM
  • Spherix
    • January 31, 2013 at 3:54 PM
    • #1

    Hi there,

    I've been away from the mapping scene for a good 8 years, and returned to mess about with Hammer a while ago. After trying to pick up slack on my current project, I release I am stuck due to lack of experience with more advanced mapping techniques.

    One of the main things that will need doing (i think) at this moment is the ground. The original map (Destroyed Village from MOH:AA) features quite a bit of uneven ground, in other words: displacements. Since the buildings on the map are not all at the same level, I can figure out how to manage the displacements, but since these do not seal the worlds I was wondering what the proper approach is the build the floor. The main brushwork is pretty much done, in regards to that the next stage is filling the level with debrees, adding in detail that the source engine is capable of and the old MOH:AA game wasn't; texturing etc. etc.

    As for the floor, to seal it up I could either go about putting a big box of nodraw below the level, and having displacements for the walkable floor itself. Or.. try to place a more realistic floor at right levels, put more effort in it, and then place displacements on top of em. Long story short: i have no idea how to continue, and what the right approach is.

    [Blocked Image: http://i47.tinypic.com/3zk48.jpg]

  • 2d-chris
    • January 31, 2013 at 4:33 PM
    • #2

    It's interesting to add all the walls first, but if in this position I would add the floors so they can be judged both visually and from a game play point of view, then seal the map off underneath your displacement maps. Get the map running without leaks and then polish the visuals and add more details after,

  • Spherix
    • January 31, 2013 at 5:17 PM
    • #3

    What do you mean exactly by adding the walls? The skybox? The map itself is meant to be a nearly shot-down town during WW2, hence the buildings don't look finished (and eventually, destroyed).

  • FMPONE
    • January 31, 2013 at 7:23 PM
    • #4

    Floors are probably one of the simplest aspects of using hammer. I would recommend getting a good amount of experience and practice with displacements in some practice maps, and then study the official maps of Day of Defeat: Source, because that's probably where displacements were used most effectively. The key thing with displacements is just to have a series of brushes about the same size in a patchwork or quilt sort of pattern, very simple, then just get a rough idea of the topography of the displacements you wish to create.

  • Squad
    • January 31, 2013 at 11:27 PM
    • #5

    Also worth studying is how the skybruses were made in for example dod_flash (it's in the sourcesdk content). Could come in handy for your type of map, it could also provide some good tips on how to make the buildings (what to turn into func_details, displacements, ... ).

  • Spherix
    • February 1, 2013 at 8:32 AM
    • #6

    Time to purchase DoD:S I guess

  • Squad
    • February 1, 2013 at 8:40 AM
    • #7

    I don't have DOD:S myself, but dod_flash is included in the SDK content by default. So Hammer can't load any materials here, but that's still better than nothing

  • PyroGXPilot
    • February 1, 2013 at 8:40 AM
    • #8

    Good array of tutorials:

    http://www.youtube.com/user/rocketrascal34?feature=watch

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login
Discord

The Mapcore Discord is our lively IRC channel of the 2000s reborn. Chat about level design, gaming, and more.

Latest Posts

  1. BELEK: turning Rouen into competitive FPS maps (Godot project, feedback wanted)

    zlatan24
    November 12, 2026 at 6:23 PM
  2. CS2 sticker critique | Would the eye or blade read first on an AK?

    EmberKrakenCS2
    November 9, 2026 at 10:21 PM
  3. dod_poznan

    Smile_2000
    November 9, 2026 at 9:10 AM
  4. [cs2][WIP] De_digital (A side only) Looking for Feedback

    Howw3
    November 5, 2026 at 9:22 PM
  5. Hello from Normandy: Metin, working on a tactical FPS

    Thrik
    November 2, 2026 at 10:19 PM
  6. How do I setup CS1.6 mapping on linux?

    zlatan24
    November 2, 2026 at 6:43 AM
  7. CS:S | de_honor | Map creation process by D'artagnan

    Dartagnan
    November 1, 2026 at 5:41 PM
  8. Made a map maker for my indie game.

    daud2k7
    November 1, 2026 at 4:19 PM
  9. First CS2 Maps DM and Bomb Defusal

    zlatan24
    November 1, 2026 at 3:06 PM
  10. POLYSTRIKE - Finally Announced After Years of Development!

    MetinSaygin
    October 31, 2026 at 10:57 AM

Users Viewing This Thread

  • 1 Guest
  1. Privacy Policy
  2. Contact
Powered by WoltLab Suite™