[UDK] Sci-Fi Stuff. Looking for advice!

    Hi together,

    I'am a beginner in enviorment creation and I'am currently working on an sci-fi styled level in UDK and got stuck.

    Now I'am looking for advice to improve it since it lacks a bit of ideas at the moment.

    Here are some shots of the current progress:

    [Blocked Image: http://img16.imageshack.us/img16/3812/highresscreenshot00003.jpg]

    [Blocked Image: http://img534.imageshack.us/img534/7150/highresscreenshot00002.jpg]

    [Blocked Image: http://img26.imageshack.us/img26/9803/highresscreenshot00002w.jpg]

    Looking forward to hear what you think!

    Any C&C is really appreciated!

    Thank you in advance!

    It could use some pipes. the hospital part needs more happening on the walls. add areas that would be for storage (and in the hallway) just what i can think of

    Hey Latteh thanks for your reply and the tipps!

    Atm I'am working on some kind of "wall support" thing to fill up the walls in that medical room.

    I plan to add some hanging lockers between two of the wall support units later. Also some desks, computer terminals, smaller medical equipment and machines to controll those robotic arms.

    Furthermore I'll add some more pipes to the corridor but I don't really know where to place them atm. Maybe some smaller ones on the ceiling?

    Don't have any ideas for the design of those things yet. Will maybe do some sketching.

    there is a lot of repition and very similar lighting - contrast your colours with lighting or textures - i think you should take a look at some of the deus ex concept art, or natural seelction to get some inspiration on where to take it

    Thank you Rick_D!

    Yes, I know it lacks variation atm. I'am thinking about things to break up the repetition but I still wait for some good ideas.

    I know the Deus Ex HR concepts. I love the style of the game and the concepts are awesome but for some reason I can't find solutions to transfer some of the "ideas" into the complete diffrent art sytle of my enviorment.

    I'll absolutely take a look at the Natural Selection concept arts. Just googelt it quick and it seems to be awesome!

    try to push those materials more. at the moment they seem kinda cardboardish. try more reflective surfaces and do some interesting variation in the specular

    Looks much better. I think you might want to try adding some variety to the floor panels, like have some with small hatches/ports etc.

    i think you want to:

    - turn of every other point-light and boost the intensity of those that are left

    - add cubemap reflection to almost all materials

    -that red PAINT stripe on the wall going over those panels make one big one rather than 3 small ones per wall

    Vilham:

    Thank you!

    I'll think about adding some hatches. Just looking for a place for them.

    Thrik:

    Thanks a lot!

    Warby:

    Quote

    turn of every other point-light and boost the intensity of those that are left

    I don't really what you exactely mean. Everywhere you see emissive surfaces, a point light was placed. I don't know wich ones to turn off.

    Quote

    add cubemap reflection to almost all materials

    There is a cubemap reflection on all parts of the corridor and also on the walls and ceiling in the room.

    Quote

    that red PAINT stripe on the wall going over those panels make one big one rather than 3 small ones per wall

    Good tipp, thanks a lot! I'll try this immediately!

    i appreciate the desire to detail the floor of the corridor like you have, but it just looks like a sprained ankle.. err toe... waiting to happen...perhaps sink the panels (so you can keep the relief) and put a corresponding grate system over them to even the floor surface?

    nice stuff.

    Perhaps give the hospital room some shape, the gurney's could roll into "bays"

    It's very square, and there's only so much you can dress up a square, dressing up a shapelier shape in the same way you'd dress up the square may inherently look better.

    You could perhaps think about where the doctor's would stand, make that part of the floor different. etc. Sometimes if you think about how the room is used the details flow naturally.

    Quote

    i appreciate the desire to detail the floor of the corridor like you have, but it just looks like a sprained ankle.. err toe... waiting to happen...perhaps sink the panels (so you can keep the relief) and put a corresponding grate system over them to even the floor surface?

    You are right.

    I'll look for a new design and make them flatter.

    Quote

    neat, try adding some white painted panels, still metal though. And breakup the blue ambient lighting by making the white panels look white - could look cool and breakup that avatar feeling you have right now.

    Hey, thanks for that tipp! Here is what it looks like with white panels:

    [Blocked Image: http://img684.imageshack.us/img684/3668/udk02.jpg]

    I also need to modify the lighting to make those panels look really white. Just need to figure out how to exactly do it.

    Quote

    Perhaps give the hospital room some shape, the gurney's could roll into "bays"It's very square, and there's only so much you can dress up a square, dressing up a shapelier shape in the same way you'd dress up the square may inherently look better.

    You could perhaps think about where the doctor's would stand, make that part of the floor different. etc. Sometimes if you think about how the room is used the details flow naturally.

    I'll try to give it some rounder, softer forms maybe. Thanks for your tipp!

    BTW:

    I've started building the starboard cargo now. Still WIP:

    [Blocked Image: http://img407.imageshack.us/img407/5583/udk01.jpg]

    So i took the liberty of doing a small paintover of you last picture. Shifted hues, added colour and mainly gave it a lot of additions to the lighting: bigger more contrasty areas, small highlights near the lights etc.

    overpaint_akira_moodier.jpg[/attachment]

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login