1. Forums
  2. Discord
  3. About Mapcore
  4. Patreon Supporters
  • Login
  • Register
  • Search
This Thread
  • Everywhere
  • This Thread
  • This Forum
  • Articles
  • Pages
  • Forum
  • More Options
  1. Mapcore
  2. Discussions
  3. Off-Topic

Buying a new computational device!

  • insta
  • August 23, 2010 at 7:49 PM
  • Skjalg
    • August 25, 2010 at 11:22 AM
    • #41

    The SSD i bought a few months back is probably the best thing I've bought since I bought SC1 10 years ago.

    It really is THAT awesome.

  • BaRRaKID
    • August 25, 2010 at 12:39 PM
    • #42
    Quote from Jetsetlemming

    RAID is not a backup. It is not file protection. Do not use RAID expecting it to save your shit. Running two drives at once, putting them both through the exact same workload next to each other inside the same computer, attached to the same power supply and motherboard, means that if one has catastrophic failure most likely both will. Take that extra HD and stick it in an external enclosure. Keep it off unless you're actively using it and make backups every time you do something worth backing up.

    Sorry but that is simply not true, at all! I don't know where your getting that information from, but having two HDs working simultaneously in a RAID array is being done for at least 20 years, and every motherboard on the market today can easily handle much more than that (I've personally set up a 4 HDD RAID array and it's working flawlessly). They may be connected to the same motherboard but the "circuits" are isolated from each other, if that didn't happened every time one of your hard drives failed you would have to buy a new motherboard as well. The same goes for the PSU, having two HD puts almost no stress on the PSU, if you check for example this PSU calculator http://www.silentmods.com/modding/PSU_W ... lator.html you can see that for example having two DVD drives uses more power than having two hard drives. As for the fail rate of using a RAID array I'll just quote wikipedia:

    Quote

    RAID 1 failure rateAs a trivial example, consider a RAID 1 with two identical models of a disk drive with a 5% probability that the disk would fail within three years. Provided that the failures are statistically independent, then the probability of both disks failing during the three year lifetime is

    P(\mathrm{dual\,failure}) = \left(0.05\right)^2 = 0.0025 = 0.25\,\%.

    Thus, the probability of losing all data is 0.25% over a three year period if nothing is done to the array. If the first disk fails and is never replaced, then there is a 5% chance the data will be lost. If only one of the disks fails, no data would be lost. As long as a failed disk is replaced before the second disk fails, the data is safe.

    However, since two identical disks are used and since their usage patterns are also identical, their failures cannot be assumed to be independent. Thus, the probability of losing all data, if the first failed disk is not replaced, may be considerably higher than 5%.

    As a practical matter, in a well managed system the above is irrelevant because the failed hard drive will not be ignored. It will be replaced. The reliability of the overall system is determined by the probability the remaining drive will continue to operate through the repair period, that is the total time it takes to detect a failure, replace the failed hard drive, and for that drive to be rebuilt. If, for example, it takes one hour to replace the failed drive, the overall system reliability is defined by the probability the remaining drive will operate for one hour without failure.

    While RAID 1 can be an effective protection against physical disk failure, it does not provide protection against data corruption due to viruses, accidental file changes or deletions, or any other data-specific changes. By design, any such changes will be instantly mirrored to every drive in the array segment. A virus, for example, that damages data on one drive in a RAID 1 array will damage the same data on all other drives in the array at the same time. For this reason systems using RAID 1 to protect against physical drive failure should also have a traditional data backup process in place to allow data restoration to previous points in time. It would seem self-evident that any system critical enough to require disk redundancy also needs the protection of reliable data backups.

    Display More

    And i never said that RAID was the same as a backup (I even said that you should keep doing regular backups while using a RAID array), but it is in fact, by definition, a method (and a very efficient one) of file protection. And it's funny that you mention external hard drives, because they have a much higher failure rate than internal hard drives tend to have. I've 3 of them sitting in my desk atm which are as useful as brick, luckily we have a 4 HDD RAID1 array

  • Warby
    • August 25, 2010 at 1:03 PM
    • #43

    i bought an ssd for my new pc and i am super happy with it i think i will upgrade my other machines with ssds aswell !

    so ssds highly recommanded !

  • sarge mat
    • August 25, 2010 at 1:06 PM
    • #44

    Honestly I think anything beyond £100 for a GPU is a bit of a waste unless you have a real need for a high end one. 8800GT's run more or less anything really well. Shame I had to replace mine with a 9800 which is fine but runs hotter.

  • Jetsetlemming
    • August 25, 2010 at 6:02 PM
    • #45

    The two most common cause of HD failures are the hd living out its lifespan and failing (once the warrantee period is up), and power surges. The likelihood of something random happening to damage one hard drive to the point of making its data unrecoverable while not happening to another hard drive inside the same machine is roughly in the "struck by lightning"/"win the lottery"/"Get rich quick for reals" level of odds.

    Being in an external HD enclosure will give the hard drive far less stress than constant usage, keep it away from dust, and make it immune from the effects of other hardware failure.

  • twiz
    • August 25, 2010 at 7:48 PM
    • #46

    I think the RAID array is useful for protecting against the random failures and the lifespan failures. Random HDD failures (which are due to the physical drive itself) do happen, and the likelihood of two random failures (even if they have a common cause, such as temperature or vibration) happening simultaneously are very low. Same goes for lifespan. Power surges should be protected against with a surge protector obviously.

    If you properly protect against the common failure modes of a hard drive, the only possibilities for failure would be either normal lifespan failure or a malfunctioning device (manufacturer's error). Keep the temperature down and minimize vibration, use a surge protector. Basically the RAID array is effective against protecting from truly random drive failure(ie, the cause is entirely internal to each device) and lifespan failure.

  • twiz
    • August 25, 2010 at 8:31 PM
    • #47

    Interesting read on the subject:

    http://www.cs.cmu.edu/~bianca/fast07.pdf

    Figure 2 on Page 8 shows the probably distribution of failure over time for a hard drive.

    Starting on page ten it discusses failures in a specific time period (such as a few hours, as in the time it would take to detect a drive failure and replace the failed drive in an array)

    Figure 10 on Page 13 shows the time between replacements on HTC1, which is composed of 3406 hard drives. When one drive failed, the lowest expected time until the next failure(out of 3406 drives) is around 4 days.

    The probability in HTC1 that a drive will fail within an hour of another drive failure is maybe 5%. With much fewer drives, that probability will obviously drop.

  • BaRRaKID
    • August 26, 2010 at 11:30 AM
    • #48
    Quote from Jetsetlemming

    The two most common cause of HD failures are the hd living out its lifespan and failing (once the warrantee period is up), and power surges. The likelihood of something random happening to damage one hard drive to the point of making its data unrecoverable while not happening to another hard drive inside the same machine is roughly in the "struck by lightning"/"win the lottery"/"Get rich quick for reals" level of odds.Being in an external HD enclosure will give the hard drive far less stress than constant usage, keep it away from dust, and make it immune from the effects of other hardware failure.

    The truth is actually the opposite of what you said, the probability of two HD failing simultaneously is really, really low. I've never seen it happen in my experience, neither did my co-workers.

    Power surges are really not one of the main causes of HD failure, it's really unusual for it to happen, and you should be using a UPS with surge suppression anyway to protect your other components. The biggest cause of HD failures is in fact dust. If particles of dust get inside the HD drive you will start to get lots of bad sector warnings, and eventually the read/write head will stop working making the HD useless.

    And again external hard-drives are not as reliable as you might think, most of the enclosures don't keep dust away from the inside, if you ever open a external hd you will find lots of dust in there, and the fact that people carry them everywhere causes much more physical damage than having a internal HD properly secured inside your computer case. The circuit boards inside external HD also break very easily, but that's because most companies use really cheap components and bad manufacturing processes to build them. Like i said before I've 3 of them sitting in my desk at the moment which are completely dead.

    I'm sorry to insist on this but you really shouldn't be misinforming people about proper ways to secure their data. RAID1 arrays are a standard in any system in which data protection is important these days, along with having a (usually) off-site backup server (this only applies to companies), and doing regular backups to an external support to quick fixes.

  • dux
    • August 26, 2010 at 11:40 AM
    • #49

    Barra knows his stuff

  • -HP-
    • August 26, 2010 at 11:44 AM
    • #50

    He's Portuguese.

  • sarge mat
    • August 26, 2010 at 1:14 PM
    • #51

    I just back everything up off site. Its really cheep for anyone to do these days.

  • dux
    • August 26, 2010 at 1:42 PM
    • #52

    Hello upload rate. There's the option to just leave the PC on overnight etc, but I sleep next to mine ;(

  • Jetsetlemming
    • August 26, 2010 at 4:47 PM
    • #53
    Quote from barrakid

    The truth is actually the opposite of what you said, the probability of two HD failing simultaneously is really, really low. I've never seen it happen in my experience, neither did my co-workers.

    Power surges are really not one of the main causes of HD failure, it's really unusual for it to happen, and you should be using a UPS with surge suppression anyway to protect your other components. The biggest cause of HD failures is in fact dust. If particles of dust get inside the HD drive you will start to get lots of bad sector warnings, and eventually the read/write head will stop working making the HD useless.

    And again external hard-drives are not as reliable as you might think, most of the enclosures don't keep dust away from the inside, if you ever open a external hd you will find lots of dust in there, and the fact that people carry them everywhere causes much more physical damage than having a internal HD properly secured inside your computer case. The circuit boards inside external HD also break very easily, but that's because most companies use really cheap components and bad manufacturing processes to build them. Like i said before I've 3 of them sitting in my desk at the moment which are completely dead.

    I'm sorry to insist on this but you really shouldn't be misinforming people about proper ways to secure their data. RAID1 arrays are a standard in any system in which data protection is important these days, along with having a (usually) off-site backup server (this only applies to companies), and doing regular backups to an external support to quick fixes.

    I don't mean power surges as in external ones, but internal ones from other bad hardware. I've seen every single piece of hardware inside a computer, down to external things connected by USB, destroyed by a dying PSU, and when you're giving computer advice to people who don't really know about hardware, you can't count out low budget PSUs, motherboards, etc.

    RAID1 is still not a favorable solution to just using external storage, IMO. Above all else, it's cheaper, portable, and uses less space than backing up every individual thing like system files. There was a 2TB "green" Western Digital drive on sale on Newegg for just $100 a couple days ago, and the external enclosure I use personally only cost $15.

  • Duff-e
    • August 26, 2010 at 8:12 PM
    • #54

    http://www.igniq.com/2010/08/23/intel-i ... rice-cuts/

  • Bunglo
    • August 26, 2010 at 8:39 PM
    • #55

    :neutral:

    Damn it.

  • Sentura
    • August 27, 2010 at 3:38 AM
    • #56
    Quote from barrakid

    The truth is actually the opposite of what you said, the probability of two HD failing simultaneously is really, really low. I've never seen it happen in my experience, neither did my co-workers.

    Power surges are really not one of the main causes of HD failure, it's really unusual for it to happen, and you should be using a UPS with surge suppression anyway to protect your other components. The biggest cause of HD failures is in fact dust. If particles of dust get inside the HD drive you will start to get lots of bad sector warnings, and eventually the read/write head will stop working making the HD useless.

    And again external hard-drives are not as reliable as you might think, most of the enclosures don't keep dust away from the inside, if you ever open a external hd you will find lots of dust in there, and the fact that people carry them everywhere causes much more physical damage than having a internal HD properly secured inside your computer case. The circuit boards inside external HD also break very easily, but that's because most companies use really cheap components and bad manufacturing processes to build them. Like i said before I've 3 of them sitting in my desk at the moment which are completely dead.

    I'm sorry to insist on this but you really shouldn't be misinforming people about proper ways to secure their data. RAID1 arrays are a standard in any system in which data protection is important these days, along with having a (usually) off-site backup server (this only applies to companies), and doing regular backups to an external support to quick fixes.

    well if that isn't a technological bitch slap then i don't know what is

  • Duff-e
    • August 27, 2010 at 4:12 AM
    • #57

    I think RAID is overkill for most people. If you mirror your primary drive you're wasting so much space on system and program files. If your goal is uptime then it makes sense but if we're talking personal data you're better off backing up online, using software or both.

  • twiz
    • August 27, 2010 at 11:09 PM
    • #58

    Yeah, all of my "really important" stuff (read: schoolwork) goes in my dropbox folder, so its all backed up online and on my other computer.

    Although, with hdds as cheap as they are now, if you're building a whole system you could just buy a mobo with raid support and an extra hdd for like an extra hundred bucks.

  • Duff-e
    • August 28, 2010 at 2:38 AM
    • #59

    I also use dropbox as my primary backup. I only keep the irreplaceable stuff there. For music/movies/games I have a script that exports a list of them and I back that up.

    I do keep a duplicate HD of my photos at my moms house though. I physically back it up every 2 months and encrypt it. My ex girlfriends wouldn't be to happy about that :x

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login
Discord

The Mapcore Discord is our lively IRC channel of the 2000s reborn. Chat about level design, gaming, and more.

Latest Posts

  1. Custom Gamemodes Contest

    Angel
    July 20, 2026 at 11:46 AM
  2. FAQ

    Angel
    July 20, 2026 at 10:14 AM
  3. Tangerine

    Harry Poster
    July 18, 2026 at 11:10 AM
  4. Any of the old guard still around? D:

    Warby
    July 12, 2026 at 8:23 PM
  5. About our archived forums

    Thrik
    June 30, 2026 at 2:12 PM
  6. Mapcore Discord

    mason_fan123
    June 24, 2026 at 8:52 PM
  7. [CS2] Valley

    Serialmapper
    June 22, 2026 at 11:56 AM
  8. Free Music / SFX Resource - Over 2500 Tracks

    Eric Matyas
    June 18, 2026 at 12:32 PM
  9. Pango [WIP]

    Elowen
    June 11, 2026 at 10:13 AM
  10. [CS2] Dvina

    Jeremy Rivera
    June 11, 2026 at 10:03 AM
  1. Privacy Policy
  2. Contact
Powered by WoltLab Suite™