1. Forums
  2. Discord
  3. About Mapcore
  4. Patreon Supporters
  • Login
  • Register
  • Search
This Thread
  • Everywhere
  • This Thread
  • This Forum
  • Articles
  • Pages
  • Forum
  • More Options
  1. Mapcore
  2. Discussions
  3. Off-Topic

Im about to lose all of my personal and nightwatch work.

  • von*ferret
  • October 21, 2004 at 4:30 PM
  • von*ferret
    • October 21, 2004 at 4:30 PM
    • #1

    About to lose all of my RMFs if I can not figure this out. last night I tried to patch my OS because my brother will not call microsoft and get a confirmation # for my OS. he was afraid that microsoft would shut down our product key and not allow us to use it anymore, which would infuriate my father. however this put me in a predicament because I had windows locking up in days. Wacko helped me find a crack, how ever something went wrong and now it wont boot up. After it gets through the login screen it enters a blue screen saying that the login process failed. All of my rmf's for both my personal work and my NW work had been backed up and than put onto this HD. However I needed the USB flash drive so I cleared it and now this is the only source that has all of my work. If I can not get these files off, I will lose all of my maps. Does anyone know of a way that I can get the OS to boot up temporarily so that I can get these files off, sweep it clean, and buy a brand new OS to install?

  • GrayFox
    • October 21, 2004 at 4:58 PM
    • #2

    Don't have a clue...

  • Taylor
    • October 21, 2004 at 4:59 PM
    • #3

    Put the hard drive into another computer?

  • tnoh
    • October 21, 2004 at 5:01 PM
    • #4

    Oh man, that sounds bad. Any backups?

  • Duff-e
    • October 21, 2004 at 5:01 PM
    • #5

    you can go to the windows recovery console and recover files....but i dont know what you would recover them to. i doubt a floppy will hold what you need

  • Mazy
    • October 21, 2004 at 5:25 PM
    • #6
    Quote from Taylor

    Put the hard drive into another computer?

    was gonna suggest that

    sounds like the easiest way to me

  • Bic-B@ll
    • October 21, 2004 at 6:32 PM
    • #7

    Get another hard drive it doesn't have to be big and put windows on it, any version, then make the old HDD a slave and the new one a master and just copy over from the new drive. You might have to buy a new HDD if you don't have another but its a solution that would work. I had the same thing happen to me last month.

  • jaardsi
    • October 21, 2004 at 7:32 PM
    • #8

    You could try accessing your files using a Linux live cd. (like Knoppix)

  • OL
    • October 22, 2004 at 12:47 AM
    • #9

    ya make it a slave in another computer or use the recovery console, you can even repair your windows installation in the Xp boot cd (act like youre going to install and press R when it says)

  • Minos
    • October 22, 2004 at 1:12 AM
    • #10

    Doesnt DOS work ? Cant u boot up windows with security mode on ?

  • Zazi
    • October 22, 2004 at 5:01 AM
    • #11

    You can try doing a soft install of winxp. Assuming it's a retail CD, you can just do a soft install that way, or just do a normal install(where the installer basically removes all of your user profiles, and the windows directory and every trace of windows... this doesn't remove any user files outside of the "Documents and Settings" folder or the windows folder). Then you can put the cd key back in... if you don't want to activate it, you don't have to since it gives you 30 days to activate it. Also, if you activate it over the phone, you'll get a confirmation number which you can use indefinately as well, as opposed to activating it online which keeps track how many times you have activated that particular product. This is also assuming you're using windows xp. Heh.

    If that fails, like everyone else said... put it into another computer. If you don't like that, try using knoppix and copying everything that way. Knoppix is great, and I use it for some of the same reasons you're having right now. It's basically an operating system that runs straight from the cd, so it doesn't take up any harddrive space at all. If you want to try this approach, head to knoppix.org and download an ISO.

  • JynxDaddy
    • October 22, 2004 at 5:43 AM
    • #12
    Quote from jaardsi

    You could try accessing your files using a Linux live cd. (like Knoppix)

    linux or slave it.

  • Section_Ei8ht
    • October 22, 2004 at 6:02 AM
    • #13
    Quote from OL

    ya make it a slave in another computer

    This is the best way. Do that, get your important files off and then tamper with your os. I would just do a complete reinstall of xp.

  • CrazyMAC
    • October 22, 2004 at 2:09 PM
    • #14
    Quote from jaardsi

    You could try accessing your files using a Linux live cd. (like Knoppix)

    Ditto that run linux off the CD grab all the files you can.

  • von*ferret
    • October 22, 2004 at 9:51 PM
    • #15

    I tried to do a recovery console and also the windows install and it says it can not detect my harddrive. Though it starts to boot off of it when I do not have the boot cd in the drive. wtf?

  • Fletch
    • October 23, 2004 at 1:38 AM
    • #16

    magnets.... really BIG magnets.

  • Bic-B@ll
    • October 23, 2004 at 4:57 AM
    • #17

    SLAVE

  • Duff-e
    • October 23, 2004 at 4:03 PM
    • #18

    put your head next to the hard drive and let it tell you whats wrong

  • brendank310
    • October 23, 2004 at 7:09 PM
    • #19

    i had the same problem at one time, i was about to lose all work and source for a medal of honor mod. i booted up linux with a recovery cd, and then ftp'ed the stuff to my xbox. im sure you could ftp it to anything though.

  • Kreigore
    • October 27, 2004 at 10:56 PM
    • #20

    When my hdd got borked all I did was a reboot and then windows didnt find my HDD, then when i tried to access the HDD all it wanted was to fomrat it :\. So i took out the HDD and placed it in a freinds computer and then we used Easy recovery in it and i got back about 80% of all my webpages and just about all my mapping stuff (expect for all my RMFs bye bye de_fender)

    So my advise is, get the files before its too late.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login
Discord

The Mapcore Discord is our lively IRC channel of the 2000s reborn. Chat about level design, gaming, and more.

Latest Posts

  1. BELEK: turning Rouen into competitive FPS maps (Godot project, feedback wanted)

    zlatan24
    November 12, 2026 at 6:23 PM
  2. CS2 sticker critique | Would the eye or blade read first on an AK?

    EmberKrakenCS2
    November 9, 2026 at 10:21 PM
  3. dod_poznan

    Smile_2000
    November 9, 2026 at 9:10 AM
  4. [cs2][WIP] De_digital (A side only) Looking for Feedback

    Howw3
    November 5, 2026 at 9:22 PM
  5. Hello from Normandy: Metin, working on a tactical FPS

    Thrik
    November 2, 2026 at 10:19 PM
  6. How do I setup CS1.6 mapping on linux?

    zlatan24
    November 2, 2026 at 6:43 AM
  7. CS:S | de_honor | Map creation process by D'artagnan

    Dartagnan
    November 1, 2026 at 5:41 PM
  8. Made a map maker for my indie game.

    daud2k7
    November 1, 2026 at 4:19 PM
  9. First CS2 Maps DM and Bomb Defusal

    zlatan24
    November 1, 2026 at 3:06 PM
  10. POLYSTRIKE - Finally Announced After Years of Development!

    MetinSaygin
    October 31, 2026 at 10:57 AM
  1. Privacy Policy
  2. Contact
Powered by WoltLab Suite™