1. Forums
  2. Discord
  3. About Mapcore
  4. Patreon Supporters
  • Login
  • Register
  • Search
This Thread
  • Everywhere
  • This Thread
  • This Forum
  • Articles
  • Pages
  • Forum
  • More Options
  1. Mapcore
  2. Discussions
  3. Level Design

Quakis' Source Project.

  • Quakis
  • March 31, 2008 at 9:40 PM
  • Quakis
    • March 31, 2008 at 9:40 PM
    • #1

    No project name just yet. I'm not going to make this project too ambitious and start small, but the basic initial plan is to go for a setting with a BioShock-ish atmosphere. The project will also be rather heavy on the custom content side of things as well. It's also another form to put together my skills and do something else with them. I'm currently starting off with building the scenes and required models for these scenes. But anything after that, will come after that, but I'm hoping to make a singleplayer level out of it at some point.

    Although it may seem a little early, I thought I'd just make a little thread to go through the progress of the project. Possibly a good chance to get some comments on everything I work on (maps/models/textures) to improve on what I make and ensure I can get the highest looking quality out it this, especially in the lighting department.

    Below is the basic rough 'sketch' of the bar area for one of the scenes made in hammer. A lot of the orange brush work is practically going to be replaced with models which you can find further below.

    Hammer Sketchup: Bar Area

    [Blocked Image: http://img84.imageshack.us/img84/7186/barsketchup01zh0.th.jpg] [Blocked Image: http://img357.imageshack.us/img357/8489/barsketchup02cm3.th.jpg] [Blocked Image: http://img84.imageshack.us/img84/8691/barsketchup03at9.th.jpg] [Blocked Image: http://img384.imageshack.us/img384/3526/barsketchup04ai9.th.jpg]

    Models so far: Bar Area (untextured)

    [Blocked Image: http://img369.imageshack.us/img369/8902/modelcombararea06ku4.th.jpg] [Blocked Image: http://img404.imageshack.us/img404/8397/modelcomchair03dw0.th.jpg] [Blocked Image: http://img387.imageshack.us/img387/1139/modelcommonbarstoolwv0.th.jpg] [Blocked Image: http://img364.imageshack.us/img364/4145/modelcommonfan01ak5.th.jpg]

    [Blocked Image: http://img245.imageshack.us/img245/9690/modelcommonfan02bn9.th.jpg] [Blocked Image: http://img245.imageshack.us/img245/2078/modelcommonwoodrail02pj9.th.jpg] [Blocked Image: http://img364.imageshack.us/img364/1432/modelcompillar01dv9.th.jpg] [Blocked Image: http://img357.imageshack.us/img357/5683/modelcomwindow04rg8.th.jpg]

    Next update will possibly be some textured models.

  • Minos
    • March 31, 2008 at 9:43 PM
    • #2

    Gordon freeman as a barman lol

    Great to see you finally working on something current gen quakis. The project seems to have a lot of potential, keep it going My only crit is that the smoothing groups look very weird in the window, I think some hard edges would make the geometry stand out more.

  • m8nkey
    • March 31, 2008 at 10:24 PM
    • #3
    Quote from Quakis

    Although it may seem a little early, I thought I'd just make a little thread to go through the progress of the project.

    I actually think it's cool to see a level progress through a thread. You're models all look very consistant with the style your going for, very nice. I particularly like the bar. I'm looking forward to seeing some textured pics. Great to see you're putting your skills to use on a newer engine too

    I also very roughly model my props in brushes then export them as DXF. That way your scale is spot on. That's a tip I learnt from kan3 .

  • insta
    • April 1, 2008 at 4:00 PM
    • #4

    Could be cool. Although the room is well populated by props, I think you need to give the actual room more depth though, have some stair-steps leading down to the main floor, give the ceiling some more height.

    Search Google or Flickr for Art Deco for some inspiration. Have a look at these pics for starters :

    http://www.wetwalls.com/images2/residential/res1.jpg

    http://blakeley.com/wordpress/wp-conten ... G_0568.JPG

  • Nurb
    • April 5, 2008 at 9:45 AM
    • #5

    Agree with insta. The floor and ceilingplan is very 2D atm.

  • Quakis
    • April 5, 2008 at 2:27 PM
    • #6

    Don't worry, the rooms and other locations won't be as flat as that. It's just a basis to work from until I'm happy with the layouts. There'll be some more variety with height, vertical space, ceiling and floor details later when it progresses a bit further in. I'd rather not add details in that will possibly be scrapped later down the road.

  • Quakis
    • April 8, 2008 at 1:22 PM
    • #7

    Updated the layout of the bar area and gave it a little more depth. Any other suggestions however are of course welcome.

    [Blocked Image: http://img404.imageshack.us/img404/5207/srcprj006ok9.th.jpg] [Blocked Image: http://img155.imageshack.us/img155/8162/srcprj007xh0.th.jpg] [Blocked Image: http://img155.imageshack.us/img155/1461/srcprj008lt8.th.jpg]

  • -HP-
    • April 8, 2008 at 5:49 PM
    • #8

    eh eh, damn that's alot of brush work! Keep up man.

  • m8nkey
    • April 8, 2008 at 9:27 PM
    • #9

    Solid start Quakis. I think a ceiling in the style of the second pic Insta posted could really suite the scene. Something else to start considering is types of wall, ceiling and floor light fixtures.

  • ⌐■_■
    • April 10, 2008 at 10:21 AM
    • #10

    yeah that looks like a good start! im curious as to where this will end up

  • Quakis
    • June 4, 2008 at 2:37 AM
    • #11

    I just feel like making a quick update due to the thick layer of dust on this thread. I've been pretty much busy with school, Star Wars: The New Era and recently got accepted into the team behind Hostile Intent: Pheonix Rising. I haven't really had the time to exlusively work on this personal project of mine, but I'm currently trying to organise a way I can get some work done on it every now and then. I'm hoping to make an update a little into the future to document a little more indepth with what I'm trying to achieve, but when it comes to actually process being made, it'll be slim since I'll most likely be putting more work into the two mods I am part of the team with. Sorry about the lack of updates but hopefully I can have something worthwhile to read or show in the future.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login
Discord

The Mapcore Discord is our lively IRC channel of the 2000s reborn. Chat about level design, gaming, and more.

Latest Posts

  1. Tangerine

    Harry Poster
    July 18, 2026 at 11:10 AM
  2. Any of the old guard still around? D:

    Warby
    July 12, 2026 at 8:23 PM
  3. About our archived forums

    Thrik
    June 30, 2026 at 2:12 PM
  4. Mapcore Discord

    mason_fan123
    June 24, 2026 at 8:52 PM
  5. [CS2] Valley

    Serialmapper
    June 22, 2026 at 11:56 AM
  6. Free Music / SFX Resource - Over 2500 Tracks

    Eric Matyas
    June 18, 2026 at 12:32 PM
  7. Pango [WIP]

    Elowen
    June 11, 2026 at 10:13 AM
  8. [CS2] Dvina

    Jeremy Rivera
    June 11, 2026 at 10:03 AM
  9. Bridges 2.0 by NEXSIDE, MAP SHOWCASE. ( Steam Workshop )

    MrTrane18
    June 1, 2026 at 7:46 PM
  10. Classic Maps Reborn For CS2

    SillySpaceCat
    May 31, 2026 at 10:33 PM
  1. Privacy Policy
  2. Contact
Powered by WoltLab Suite™