1. Forums
  2. Discord
  3. About Mapcore
  4. Patreon Supporters
  • Login
  • Register
  • Search
This Thread
  • Everywhere
  • This Thread
  • This Forum
  • Articles
  • Pages
  • Forum
  • More Options
  1. Mapcore
  2. Discussions
  3. Level Design

[CSGO] cs_tile - Looking for some help

  • vector_overload
  • July 22, 2020 at 5:18 PM
  • vector_overload
    • July 22, 2020 at 5:18 PM
    • #1

    Hello, I have and idea on a hostage map that I had not seen done before. I had an idea about making the hostage rescue have a timer where the CTs would have to stay in the rescue zone for matter of a few seconds to rescue the hostage. Thematically this would be waiting for an elevator, blastdoor, helicopter pick up, etc. I wanted to experiment with how this might effect the asymmetric nature of hostage rescue. The mechanical way to execute this, I believe, is to make a trigger that will only work if a CTs enters and it with a hostage. The test I am trying is a door that opens to the rescue zone. My issue is that I haven't really mapped since the late 2000s and I am running to the limit of my knowledge on how to do this. I have looked at all kinds of resources and I cant find a way to filter for CT carrying the hostage. Any help is much appreciated.

    Some details on the maps theme and layout: Granite quarry of sorts. Hostage A is in or on the roof of a small building. Hostage B is in bottom of a dilapidated warehouse. CT spawns entrance of the quarry. T spawns at the back of the quarry. Rescue zone in the middle, but I would like to experiment with a second rescue in the terrorist spawn. But that might be too chaotic.

  • sn0wsh00
    • July 22, 2020 at 9:56 PM
    • #2
    Quote from vector_overload

    4 hours ago, vector_overload said: Hello, I have and idea on a hostage map that I had not seen done before. I had an idea about making the hostage rescue have a timer where the CTs would have to stay in the rescue zone for matter of a few seconds to rescue the hostage. Thematically this would be waiting for an elevator, blastdoor, helicopter pick up, etc. I wanted to experiment with how this might effect the asymmetric nature of hostage rescue.

    I actually did something similar for a minigame/obstacle course map I just released. On that map, doors will open to a rescue zone 43 seconds after CTs reach the hostage. To do this, I:

    1. Created a trigger_multiple brush entity, a func_door brush entity and a filter_activator_team point entity, and named the three entities hostage_reach, hostage_res_door and ct_filter respectively
    2. For ct_filter (the filter_activator_team entity), I set the "Filter Team Number" to Counter-Terrorist
    3. For hostage_reach (the trigger_multiple entity), I set "Delay Before Reset" to -1, Filter Name to ct_filter and made sure only the "Clients" and "Correctly account for..." flags were checked
    4. Under the output tab of hostage_reach, I created an output. "My output named" was set to OnTrigger. "Targets entities name" was set to hostage_res_door (the func_door entity). "Via this input" was set to Open, while the delay was, in my case, set to 43 seconds
    5. Under the flags tab of hostage_res_door, I made sure none of the flags were checked
  • vector_overload
    • July 23, 2020 at 3:33 AM
    • #3
    Quote from sn0wsh00

    5 hours ago, sn0wsh00 said: I actually did something similar for a minigame/obstacle course map I just released. On that map, doors will open to a rescue zone 43 seconds after CTs reach the hostage. To do this, I:

    1. Created a trigger_multiple brush entity, a func_door brush entity and a filter_activator_team point entity, and named the three entities hostage_reach, hostage_res_door and ct_filter respectively
    2. For ct_filter (the filter_activator_team entity), I set the "Filter Team Number" to Counter-Terrorist
    3. For hostage_reach (the trigger_multiple entity), I set "Delay Before Reset" to -1, Filter Name to ct_filter and made sure only the "Clients" and "Correctly account for..." flags were checked
    4. Under the output tab of hostage_reach, I created an output. "My output named" was set to OnTrigger. "Targets entities name" was set to hostage_res_door (the func_door entity). "Via this input" was set to Open, while the delay was, in my case, set to 43 seconds
    5. Under the flags tab of hostage_res_door, I made sure none of the flags were checked

    Thank you, I will have to try this! I will have to check out your map to see your results.

  • vector_overload
    • September 10, 2020 at 6:43 AM
    • #4

    Ok, after some ironing and what not, I'm back.

    I created a brush around the rescue zone to filter for CT. When it filters for CT it starts several timers. Most timers are cosmetic. Is a door. This door is a clipping brush and is one unit above the rescue zone and exposes it after the timer is up. But none of this activated until after a hostage is picked up.

    Ideally the it should work where T can have a chance to mount a defense on the hostage pick-ups. Then have chance to intercept the hostage carrier. Then lastly have one final chance to stop the rescue while the CT are defending the carrier. I have yet to play test this. (trouble getting the goons all together on one day at one time lol) Map is up here https://steamcommunity.com/sharedfiles/fi…/?id=2180099227 Again this is more of an experiment in the hostage game mode than anything.

    Quote from sn0wsh00

    On 7/22/2020 at 3:56 PM, sn0wsh00 said: I actually did something similar for a minigame/obstacle course map I just released. On that map, doors will open to a rescue zone 43 seconds after CTs reach the hostage. To do this, I:

    1. Created a trigger_multiple brush entity, a func_door brush entity and a filter_activator_team point entity, and named the three entities hostage_reach, hostage_res_door and ct_filter respectively
    2. For ct_filter (the filter_activator_team entity), I set the "Filter Team Number" to Counter-Terrorist
    3. For hostage_reach (the trigger_multiple entity), I set "Delay Before Reset" to -1, Filter Name to ct_filter and made sure only the "Clients" and "Correctly account for..." flags were checked
    4. Under the output tab of hostage_reach, I created an output. "My output named" was set to OnTrigger. "Targets entities name" was set to hostage_res_door (the func_door entity). "Via this input" was set to Open, while the delay was, in my case, set to 43 seconds
    5. Under the flags tab of hostage_res_door, I made sure none of the flags were checked

    THanks again for the feedback. I did see your comment on the workshop. I have been waiting to play test before settling to much on the radar, also I'm lazy :D

  • vector_overload
    • September 10, 2020 at 4:00 PM
    • #5
    Quote from ThunderKeil

    4 hours ago, ThunderKeil said: Looks neat, always fun to see slight variations on existing gamemodes. I tried making a map where the CTs started in possession of the c4 a few years ago, didn't really go anywhere but I'd like to think the concept could still work . .

    As for the door, I suppose this works fine, but if you wanted to pursue your original concept more closely; I forget *exactly* how just now, but I recall it should be possible to ''tag'' players, as in - attach an object name to them when e.g. they walk through a trigger volume, or - in this case - pick up the hostage. You'd then be able to use that name with a filter to open the door for them

    Yeah, the whole door thing is just a clunky way of getting the idea off the ground. I agree, not elegant at all. I know there must be a way to tag players in a way to be able to filter them. I would like to experiment with having the hostage carrier remain in the rescue zone for set time.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login
Discord

The Mapcore Discord is our lively IRC channel of the 2000s reborn. Chat about level design, gaming, and more.

Latest Posts

  1. [cs2][WIP] De_digital Version 2! Looking for Feedback

    Howw3
    November 19, 2026 at 5:56 PM
  2. Let's go!

    Thrik
    November 18, 2026 at 6:48 PM
  3. [TF2] koth_arctic - revisiting my old winter map

    zlatan24
    November 18, 2026 at 1:06 PM
  4. Hello from Normandy: Metin, working on a tactical FPS

    zlatan24
    November 17, 2026 at 6:29 PM
  5. Mapcore Introductions Thread

    bergman
    November 16, 2026 at 12:21 PM
  6. BELEK: turning Rouen into competitive FPS maps (Godot project, feedback wanted)

    zlatan24
    November 12, 2026 at 6:23 PM
  7. CS2 sticker critique | Would the eye or blade read first on an AK?

    EmberKrakenCS2
    November 9, 2026 at 10:21 PM
  8. dod_poznan

    Smile_2000
    November 9, 2026 at 9:10 AM
  9. [cs2][WIP] De_digital (A side only) Looking for Feedback

    Howw3
    November 5, 2026 at 9:22 PM
  10. How do I setup CS1.6 mapping on linux?

    zlatan24
    November 2, 2026 at 6:43 AM

Users Viewing This Thread

  • 1 Guest
  1. Privacy Policy
  2. Contact
Powered by WoltLab Suite™